Extensive ARB Range for
Nissan Navara NP300

ARB is pleased to offer an extensive range of accessories for the soon to be released Nissan Navara NP300, including front, rear, side and under body protection as well as rated recovery points and the ARB Classic canopy. The new NP300 is a significant improvement over the outgoing D40 model, and with this in mind, ARB engineers have developed the Summit protection range around the cutting edge styling of the vehicle.

Summit Bull Bar
Up front, the ARB Summit bull bar enhances the swept and angular bonnet line, while complementing the overall future focused design of the Navara. The bar provides a commanding aesthetic to the vehicle by utilising 60.3mm outer frame and cross bar tubing in the construction.

The NP300 bull bar is able to accommodate a range of low mount electric winches, up to 10,000lb, along with twin Hi-Lift jack points to assist with difficult recovery situations.

Provisions for ARB Intensity LEDs and IPF driving lights are integrated into the top pan of the bar, while the ARB LED indicator and clearance light assembly is included as standard.

Side Rails and Steps
Side rails and protection steps integrate with the bull bar, offering protection to vulnerable quarter and door panels. An all new clear anodised tread plate provides easy ingress/egress to the vehicle in all weather conditions.

Rear Step Tow Bar
The all new Summit Rear Step Tow Bar is a class leading rear protection and tow system designed to appear as original vehicle equipment in finish and integration.  A 50mm, 3.5t tow hitch enables heavy trailers, caravans or boats to be connected with ease, while also allowing the use of a hitch mounted recovery point.  A lift up cover panel conceals trailer electrics, ARB air compressor and rear camera connections and a 50amp Anderson plug.

Classic Canopy
Available in a smooth or textured exterior finish, the ARB Classic canopy for the new Navara features curved, tempered and grey tinted safety glass to follow the contour of Nissan’s unique tailgate spoiler.  The canopy shell also accommodates the protrusion of the vehicle’s third safety lamp, located on the top rear edge of the cabin.

Manufactured from tough ABS thermoplastic, the canopy can be colour coded to suit vehicle paintwork.

Under Vehicle Protection
Extensive under vehicle protection panels have been specially developed for the NP300. Fabricated from 3mm pressed and folded laser cut steel, these four panels protect the sump, transmission and transfer case from hazards off road. All panels are zinc plated and powder coated for a visually pleasing appearance.

Rated Recovery Points
Mounted directly to the vehicle chassis via high tensile bolts, this 8000kg rated recovery point mounts to the left or right hand side of the vehicle, or both, depending on customer preference. The point has been rated for angled pulls, up to the maximum turn angle of the front wheels. The long slot allows the recommended 4.75t bow shackle to be fed through the opening and attached to the strap using the pin instead of the bow.

Please note that the recovery point will not fit vehicles fitted with the factory bumper.

Further NP300 accessories will be released shortly. Contact ARB for part numbers and pricing.

Find your nearest store
*International model shown